gypsum board production line

Gypsum Board Production LineGypsum board, as a wall material,plays an important role in the building. Plasterboard gypsum,as the main architecture, is based on raw materials, mixing fibers, additives (foam, retarders, etc.) and appropriate amount of light fill. Add water and mix theminto slurry. Thenpour the slurryon the paper, forming the follow the above paper level. After solidification, the slurry forms a core band ,which will combine with the protecting tissue firmly together. Plasterboard, with a light weight, good insulation properties, fire performance,can nail, can be cut, can be planed. Because of itsconstruction and installation convenience, it's mainly used in building interior walls and ceiling materials. The improvement in the mixers structure makes the slurry be mixed more evenly, leave the material more smoothly ,and improve the equipment efficiency greatly. In order to adapt to the construction and installation needs, we increased the height of the edge degrees of the gypsum plasterboard. In addition, the widespread use of the flat-panel molding technology out, the easy board surface formation, the width and thickness adjustments to the molding of the wet plate continuously improved quality. Thus, it can eliminate the enormous accumulation of the slurry before the pre-forming roller in the traditional manner.For ingredients, water, cream ratio, the stability of slurry, it also puts forward higher requirements. Dynamic foaming technology improves the hardening gypsum board lower surface density and the strength. DCS control system makes the production of gypsum board enter a newstage of the control. The production control can become more systematic and networked, and be supported by the industrial television device.